6 tips to remove paint using liquid remover
What do you need?
gloves, brush, remover, spatula, sponge, water with detergent fixative. These add-ons can purchase in our shop https://cano-sa.com/
1 – Make sure you know the product properties. Carefully handle remover, because of their volatility.
Read the instructions and recommendations appearing on the product packaging, considering that each has its own characteristics remover.
2 – This time we will employ a liquid remover to remove painting a framework.
To start, if faces several layers, perform grid-shaped notches to facilitate absorption Remover.
3 – use a brush to cover the area with remover
Apply with brush on the treated area thick films Product.
The number of layers to be applied will depend on product quality and quantity of existing old paint.
4 – Let acting chemistry for a quarter of an hour. wait 10 a 15 minutes sufficient time for the chemical components paint remover attack, considering that will form a mass, If not removed in time you can reach solidifying.
5 – Proceed to gently remove the paint with a spatula, using the tool up to remove the mass of dissolved paint, without scratching or damaging the wood surfaces.
6 – Clean, abrade and to avoid problems, apply fixative
Wood rub well with a sponge soaked in soap and water to remove chemical residues.
In some cases, It should also be cleaned the surface with a neutralizer product.
Once the wood is dry, only be the finishing touch: sanding and a primer or sealer depending on the finish desired.
Some advices:
– When working with removers, Make sure the room is well ventilated and do not drink, drink or smoke during application.
– If you notice the existence of cracks during the preparation of the doors and windows for painted or varnished back, fill them with wood putty and when the product has dried, abrade the surface again to make it uniform. Then apply special fund for wood.