To paint a pool it is important to follow certain steps to prepare the surface and then the steps for painting. Below I detail the 5 most important steps to prepare the surface:

1. Clean the pool surface with a cleaning solution and a stiff bristle brush to remove any debris or dirt that may prevent the paint from adhering properly.

2. Use a putty knife to scrape any loose or peeling paint from the pool's surface..

3. Sand the surface of the pool with fine-grit sandpaper to create a rough surface that allows the paint to adhere better..

4. Wipe the pool surface with a damp cloth to remove any dust or residue left behind after sanding.

5. Cover the surrounding areas of the pool with plastic wrap or tape to prevent staining during the painting process..

Below I detail the 5 most important painting steps:

1. Use an acrylic roller to apply an even coat of paint to the entire surface of the pool..

2. Use a flat or trowel brush to paint the corners and edges of the pool.

3. Use a bucket to mix the paint and an extension roller if you need to reach higher areas.

4. Applies a second coat of paint after the first coat has dried.

5. Use a putty knife to scrape up any excess paint or drips..

I hope this helps you achieve the desired result in your pool painting project.! And take a good dip.